news

My android tablet is stuck on the android screen

My android tablet is stuck on the android screen





Valid till 2017/5/25



May 19, · Hi i am having the same problem but on my connect9 tablet, i reset it n its stuck on android, what should i do, android tablet stuck on android screen. Part 3: How to fix your Android phone or tablet stuck on boot screen With all of your data in a safe place, let’s see how to fix an Android that is stuck on the. I am new to this forum. I just wanted to seek your help. I have a tablet which is working fine a few days. But one day when I started the tablet its got stuck at.
Android stuck after software updates This is one of the more common causes that can trigger this issue to happen on an Android especially Stuck the update did not get to finish properly. Anyway, this is my first time leaving a comment in a page to show my deepest The so Thank you and Keep it up: Do you have access to that firmware that is an exact full match? Your problem Android be a really difficult Screen to try and resolve but it is Tablet possible. No serial Android ID numbers.
May 19, · Hi i am having the same problem but on my connect9 tablet, i reset it n its stuck on android, what should i do, android tablet stuck on android screen. Part 3: How to fix your Android phone or tablet stuck on boot screen With all of your data in a safe place, let’s see how to fix an Android that is stuck on the. I am new to this forum. I just wanted to seek your help. I have a tablet which is working fine a few days. But one day when I started the tablet its got stuck at.

my android tablet is stuck on the android screen

my android tablet is stuck on the android screen

my android tablet is stuck on the android screen

my android tablet is stuck on the android screen

my android tablet is stuck on the android screen

my android tablet is stuck on the android screen

my android tablet is stuck on the android screen

my android tablet is stuck on the android screen

Latest version on stuck the screen tablet is my android android for windows phone

Now I can get into safe mode, but whenever I want to choose something it just freezes. You can read more about the effects and the results of a hard reset HERE but in essence a hard reset is going to remove all the user data from the phone, including pictures, videos, music, contacts etc. Thanks you for your Kind words, its moments like this that creating this website to help readers is really worth it. If you narrow it down to a malfunctioning or defective memory card then you might need to look into buying a replacement SD card. Where would I find the serial number of the mother board? OK here is what I will do for you, give me the Tablet brand and model along with the motherboard ID number and I will give you a direct link to your firmware here in the comments.

All readers please see this Article for your Firmware file please. Hi Ricardo, I believe your process is very clear. Please use new version image! As the message says you might have a corrupted file, so use a new one or download the file again.

I believe that is not really the firmware… Just hoping you can find one…. Ricardo,,, my Kata i4 is not working, and it has a built in memory card. And when I opened again, its still not working..

You can use the flashing method that does not require a memory card and finally when you get the no command warning if you are trying to wipe try using another button at that screen such as pressing up, down etc or using buttons such as the soft keys to select.

Also is says this is not compatible with your device. Please search for a suitable replacement app. Hi i need firmware for a13 v2. Any help much appreciated. Sorry never had that issue, best I can suggest is find the correct file and attempt to flash again or look into debricking your device.

To all readers in need of a Firmware please read this updated article. X but still cant open part file. Its hard to find the exact match at times and some files can be corrupted, so either download again or find the file from another source or another matching one.

Fixing these things require patience. Please read this article and all other readers please do the same for your Firmware files. Can you please help me with it? Thank you in advance.

Hellow my friend, I opened my tablet but I couldnt find the board id, it isnt written, there is only the chips…my tablet looks like the black you have. In one chip i saw axp and that the proccessor is a13……the brand name is vivaco v-tab …pleasee help..

Dude i found my firmware but ntn is burning to the sd card.. It shows its loading but the disk is still empty.. After the firmware has burned.. I insert it in the tablet..

But i see a red box Nd a message saying an error message about script information not found. Try burning the ROM again if the same thing happens then the issue is the ROM and you will need to get it from a new source.

This will happen at times – check your SD card and try again, if that fails change SD cards and finally if that does not work change the ROM. Thanks for the video anyway and more power!!!

Hope you can read this. I have managed to open it but I cannot find processor number or ID. I am 75 years old so I am not very computer friendly but I can try. Can you please help me to get my tablet working?

I have the same problem for my tablet that sticking with android logo. But the link is not working at all… so can you please give me a link to download that? Hello, iam prince my mid tablet stucks on boot screen.

I need to find firmware for my Chinese tab which is stuck at android logo. Is there any way to convert this commands settings into English. Or let me know away to re-install Android to this TAB.

Thanks for the given stuff in your blog. O1 Please help me Ricardo. I had followed your steps in the video. Will not do anything to your SD card when finished you can format it back to normal or delete the files.

Andriod tab 4 im doing this on i need a fast comment please thank you and my device was rooted btw lol it just stays stuck on the SAMAUNG screen when trying to boot up and if i got it to boot up but everything was not respontive is there a fix to that aswell well anything i would click would be very slow to respond.

Yes its always smart to try to wipe the device first before attempting flashing. Flashing or wiping the device from recovery will not affect the things you have on the SD card, unless you are using it for flashing in which case I advise you back up the contents.

In cases where your tablet is slow and it boots up its advised to either wipe the Tablet or free up some space or clean junk files from your device. Any other questions you may have please feel free to ask.

However, after I take out the SD card and power it back up, it gets to the Irulu logo screen and says System is Starting… and just sits there. My serial number for the tabler is SN: Any help is greatly appreciated!

Do you have access to that firmware that is an exact full match? I downloaded it straight from the Irulu site using the SN on the back of the tablet and you saw the result.

It just stays on the Startup screen. Do i need to open the tablet and get a number for you? It should work fine, but double check the page on the manufacturers website to see what program they recommend that you use to confirm fully.

Thanks for your reply, the manafacturer recomends the programs which nly work when tablet is fully functional, should i try this and is their any phoenix card tool for ubuntu not for windows.

Thanks, Your site is awesome. Thanks you for your Kind words, its moments like this that creating this website to help readers is really worth it. As for should you try this You have nothing to loose and from the info you have given it should work.

Sorry my bad english. I have a big problem. This article here will answer all your questions sorry for the long delay. Hello Tutorial is Pretty Good…. What are you using to extract it?

I ran into a problem while attempting this method. Whenever I try to place my SD card into my tablet and power it on so it can format the tablet I receive an error that goes as follows: Try another firmware or recreate the the Bootable SD card, you can sometimes try downloading the file again as something might have gone wrong in the download process.

This process is keep repeating, its this normal? If this is abnormal, what should I do? That weird, try recreating the bootable SD card and try again, if the issue persists then try either downloading the firmware again or getting a better match.

Its either hit or miss with these things. Hi Ricardo, your blog is very helpful. It is a A33 GT90H-v1. I actually have another one exact the same. Do you have an idea how I can copy the form ware from the one that is working properly?

Hello My tablet was old one I kept it aside now after your post I will try to recover that brand: A10 and board Id: I cant Able to find anything in my tab for its firmware.

So Please help me to for firmware of it. Current card sprite failed Now Hold The Machin. Hey I need some help. Could you help me please. Thanks for your diligence Nick and your patience really paid off for you in finding your Firmware.

Please leave the details as to the exact Wintouch firmware that you used. So glad your tablet is even faster too. I have a Blaupunkt Endeavour NG with the Android screen problem but unable to locate appropate firmware — can you help.

It was just what I was looking for. That happens sometimes, it may be a slight mismatch or a drivers issue, its fixable do some research. I have problem with the phoenix card. Please help me sir.

Hi, Thank you for making this video. When i went through your blog i found a similar firmware you have suggested to someone else. So I downloaded it. But my problem was with the Pheonix card 3.

After doing all that as you said in the video i do not see any files on the SD card. Even using another version of the Pheonix Card 3. I did this with a 2GB card and a 8 GB card as well with no luck.

Yes you should the program can be buggy at times and it may take a few tries until the card is created properly. Thanks for this tutorial. I opened it up and the motherboard is inetf-rev The processor is A Can you please help me find the firmware for it?

If the firmware for it cannot be found, would it be acceptable to use a different firmware? No serial or ID numbers. The box it came in just says Android 4. Any help would be very much appreciated.

Your Android device can begin booting then after the Android logo it goes into an endless boot loop – stuck in the Android screen. At this point you are unable to make anything work on the device.

Fortunately for you we have a full solution that will ensure your device goes back to normal without ant data loss. This particular problem can be caused by a number of issues with your device.

Some of the most common ones are:. The solution for this problem will result in data loss. For this reason it is important that you recover the data from your device before attempting to fix it.

You can recover data from this unresponsive device using dr. Some of its prime features include:. Download and install dr. Then connect your Android phone to the computer using a USB cable.

Select the data types you want to recover from the device stuck on boot screen. By default, the program has checked all file types. Click on Next to move on. Then select the fault type for your Android phone.

In this case, we select Touch does not work or cannot access the phone. Once the phone is in download mode, the program will start download the recovery package for your phone. After the download complete, dr.

Just select the ones you need and click on Recover button to recover them. In some devices you may also need to hold the Home button as well. Wait for the process to complete.

Fixing an Android stuck on the Boot screen is not very hard. Just be sure to have all your data secured safely before you start. Let us know if everything worked out for you.

Backup data on your Android devices easily and restore backup files selectively to any device. You can find many interesting contests here to win useful gifts! Get in to complete the test and see if you are right or not.

Let’s check how others say. No matter what kind of mobile issues you meet, find the solution here. For hard reset info http: Also refer this video will be of great help. Thank you for your interest in this question.

Because it has attracted low-quality or spam answers that had to be removed, posting an answer now requires 10 reputation on this site the association bonus does not count.

Would you like to answer one of these unanswered questions instead? Questions Tags Users Badges Unanswered. Android Enthusiasts Stack Exchange is a question and answer site for enthusiasts and power users of the Android operating system.

Join them; it only takes a minute: Here’s how it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the top. Android Tablet Stuck at Boot Screen.

Is on screen android the stuck my tablet android free boot time

Things are about to get a little technical. One of the reasons why this might be happening on your cell phone is that its bootloader may not be functioning properly. The bootloader is a piece of software or code which gets executed before an OS Operating System, in this case the Android OS, starts to run.

Every Android smartphone has a bootloader that tells the OS kernel to boot normally. If there is a problem with the bootloader then the phone may not know how to boot correctly and can turn on get to the phones logo and then power off, over and over again in an endless loop.

So if you recently wanted to flash a custom ROM to your smartphone and you unlocked your phones bootloader to allow you to do this and now your phone wont power on properly then something might have happened to the bootloader and it may now be malfunctioning.

If your phone just started re-booting continuously then it too may have something wrong with its bootloader. So if you do have a problem with your phones bootloader and your phone is caught in a bootloop as a result of it what can you do to fix it?

Try unlocking your phones bootloader and then reboot the phone to see if it will power on properly again…. There are many guides online that can walk you through the process of unlocking your Androids bootloader if you are not quite sure how to do this.

If the phone boots up normally then enjoy your working cell phone. If not then you might need to look into flashing the phone. At this point I recommend that you try installing a new ROM onto your smartphone.

Just make sure to research the entire process before undertaking the task. It might seem overwhelming at first, especially if you are not too tech savvy, but there are often many great resources online that can help walk you through the process.

I hope that you found it helpful and insightful. Such comments are always appreciated and I always look forward to reading them. If you plan on posting or asking a question however, I understand that this particular problem can be frustrating and difficult to try to resolve and will likely require more research regarding how to accomplish the suggestions listed above for your particular cell phone.

In this regards the internet search engine s are going to be your best friend. Make sure to do lots of research especially if you need to flash a new ROM to your device. As a reminder, PLEASE do not ask how to perform specific tasks for your particular smartphone and or where to find the exact software that you will need to use for your particular smartphone.

I cannot keep up with these types of questions and they become overwhelming at times; especially for topics such as this one. Otherwise I welcome all well written, thought out and detailed comments.

Providing as much detail as possible in your explanation often helps take a lot of the guess work out of the equation as well and the more information I have to work with the better answer I can usually provide.

If you have a question that is a little off topic then someone else may have already asked that same question on the site and you might want to perform a search using the search bar on the right of the page.

Thanks again for reading, I wish you the best of luck in resolving this problem, and I hope you have a fantastic day. I rooted my mobile lg d and tried to install CyanogenMod 12 rom in it I have no idea.

Sorry to hear about your LG smartphone. Unfortunately this issue is one of the more common issues that can occur when choosing to manipulate the preloaded software on an Android smartphone.

There is always hope. What I suggest that you do is to start over from the beginning. Try reinstalling that software again. If that too is unsuccessful you might want to consider locating and installing the original or an up to date official firmware release by LG for that specific smartphone.

My phone was stuck in its bootloader and my father was gonna kill me if I didn’t fix it before he came home.. Can you help me start the bootloader of my phone.

It always get stuck on the usb clover sign and then switches off. When I try to start the bootloader from the assigned keys, the phone starts. What should I do? My tab keeps saying android is upgrading and is stuck there.

After a hard reset it got stuck on the Lenovo logo and after a reboot it says Android is upgrading. Can you help me? She got a prompt to update the phones software, accepted and the phone started to update but seemed to get stuck or frozen on that update screen and then frozen on the HTC screen.

The phone stayed like this for a whole day. I have run across the rare occasion where for whatever reason a phone took over 48 hours to complete its upgrade. This is uncommon of course as a phone or tablet should be able to update fairly quickly but perhaps your tablet has fallen into this category and just requires more time to finish upgrading.

I recommend waiting for a good 48 hours before proceeding to this step in troubleshooting though just to see if your tablet will finish and start working again on its own.

You do not have to worry about manually connecting to a Wi-Fi network because as you correctly pointed out your tablet will not even turn on properly much less allow you to access its Wi-Fi settings.

Many smart devices will automatically connect to a Wi-Fi once they have booted to a certain point so long as the device has successfully connected to that Wi-Fi before and if it still retains that networks information.

Whether your tablet will be able to actually start up to the point of being able to connect to a Wi-Fi network and then establish an internet connection is currently a mystery and even if it could there is no telling if the hard reset that you mentioned doing wiped out any of the saved network data which may have been stored on your tablet.

I simply mentioned this step to give you a little more of an edge when trying to resolve your current issue should your tablet make an attempt to reach out and try to establish an internet connection through a familiar Wi-Fi network.

Give it another 24 hours my friend. I prefer installing fresh because I rooted my tab. But I can’t find a correct software for my device. Tried the different steps; soft reset, wipe cache etc, but I was anxious to do the factory reset – but it works.

Just, with a little patience minutes while the animated logo is displaying and the system is loading factory firmware you can’t distinguish this from the stuck boot logo the Progress bar shows up beneath the logo.

My phone is stuck in a bootloop after flashing a stock ROM I have a LG Realm phone which is currently not starting up properly getting stuck in the power up mode repeating the logo screen.

And I have found this to be really helpful, though the safe mode suggestion did not work with my phone. But I still really find this useful, being as I did not know that there were so many different options for me to choose from.

Even though I am a little bit hesitant to try all of these because of fear of loosing important documents and files! I really do appreciate the person who took the time to make this android forum!

I don’t want to do the factory restart because I don’t want to lose my phone numbers I have had my LG G4 for less than 7 months and it is stuck in boot loop mode showing LG and rarely the Verizon logo and then back again.

I tried everything you listed that I could except the boot loader software since I can’t get to that screen on the phone. I also tried freezing the phone for 30 min which helped to turn it on once.

I am sad to loose all of the pictures. My first suggestion is to never ever expose your phone to extreme temperatures. This includes freezing your phone in a freezer or heating the phone up using a blow dryer or an oven or any other such methods.

Freezing your phone in the freezer can lead to a high risk of actually causing physical damage to your phone as opposed to preventing physical damage to your phone. Have you ever reached into the freezer and grabbed something and a bunch ice fell off of it?

Imagine that moisture getting into your cell phone and freezing there by expanding and causing physical damage to the phone. That being said this issue is often a software related issue so make sure to review and follow all of the steps listed above.

Saving pictures and data from a phone when this specific issue occurs is not always possible. For the past few days it’s been giving me pop-ups that random apps have stopped, and need to be force closed.

I’ve had to restart the phone many times because of this. Yesterday I tried to restart my phone and it wouldn’t boot past the logo. It booted up this morning, but the pop-ups made it impossible to use so I restarted it and it’s not booting up again.

I performed a factory reset about 3 days ago but after I backed up my data the problem came back. It sounds like something on your phone is causing mischief. You might have to go through and delete some stuff on your phone in order to locate what is causing problems and then either update that application or remove it from the device.

Try booting your phone into safe mode and it will likely disable the troublesome application that is preventing your phone from starting properly, and allow you to start the phone which should allow you to go through those applications and remove some of the ones what you think might be the culprit.

The hardest part is going to be locating what exactly is causing the problems. I hope that helps Ky. If I was you I would start with any applications that were updated or installed around the same time that this issue started happening.

My Android phone is stuck at the Android logo and it doesn’t open even if I already did a factory reset. Can you help me with this? I’ve got my phone stuck in a bootloop, but I cannot reboot into safe mode or download mode.

This means I cannot flash another ROM to the phone. Are there any other options? Hello, Thanks for this detailed guide. I’ve tried most of the steps you talked about but my LG d still wont get past the boot logo or reformat.

I deleted some file folder bin from the internal memory on my Lenovo AH tablet because I though it wasn’t an important file. Now my tablet is stuck on its logo. I tried to flash it but my tablets usb debugging is disabled because I don’t know how to enable it.

Please somebody help me fix it I want my tablet back. My Micromax A Unite 2 is having problems booting and not moving from its startup logo. I have done a Hard reset and have wiped the cache but the problem remains the same.

What else I can do? Make sure to reread the article above making sure that you do not skip any steps or suggestions as to what you might be able to try. Thank you for your comprehensive guideline.

In all the many threads all are talking about the USB connection. However, I did not find a guideline how to connect a device that is stuck on the boot screen. The options to put the phone into the debugging mode or MTP mode is not available.

So how can I connect a phone that is stuck with USB? Just like you will not to be able to transfer information from most smartphones unless you unlock them first. The phone has to be on for you to be able to transfer information through a data cable.

Now if you cannot get past that loading screen and your phone is stuck and not booting properly then you have to try to get that issue resolved and sometimes saving information from the device is not going to be possible.

A jig is basically a USB storage device which you can plug directly into the phone and has the operating system built into it and you can use it to reload the operating system on the device.

Finding a jig for your specific cell phone might be a challenge though depending on which device you own. I tried to restart my phone many times but it didn’t start. I also did a factory reset but that too didn’t work.

When I attempted to turn it on, it just stays at the HTC logo for a few seconds.. I couldn’t get in to safe mode either. So I bought a new battery and switched it out..

Now it still gets stuck at the logo, but the red light doesn’t flash although it shows the battery on the screen and it doesn’t charge. Now I can get into safe mode, but whenever I want to choose something it just freezes.

Is there any solution, or can I just throw my phone out the window? My Samsung Galaxy Tab 4 doesn’t seem to have the same problem as anything listed above. You can’t do anything at this point to change anything on the screen except run the power out.

I can’t get past this stage at all. I’d love to hear anything you’ve got. This page or site helped me a lot. Thank you, Thank you so much. Without this I think I was gonna cry because I really couldn’t start my phone.

Anyway, this is my first time leaving a comment in a page to show my deepest gratitude so Thank you and Keep it up: Skip to main content. Disclaimer I try to avoid giving advice about software manipulation and or customization but I get asked for help regarding this type of issue a lot.

Android stuck after software updates This is one of the more common causes that can trigger this issue to happen on an Android especially if the update did not get to finish properly.

There are many things that can happen which can cause a software upgrade or update not to finish correctly including: The computer being used to apply updates froze or powered off during the procedure.

The phone was unplugged from the computer before the update was finished. The phones battery ran out before the phone was finished with the installation. The update was interrupted for whatever other reason s causing the installation to fail.

Hello, please help me locate firmware to flash this Board ID: I think it is trying to load some kind of virus. I do not trust it is there some other place to get a image file. I have no control over those pages, the file or link you need is on the page without need to get any.

All readers please see this Article for your Firmware file please. Hi Ricardo, I believe your process is very clear. Please use new version image! As the message says you might have a corrupted file, so use a new one or download the file again.

I believe that is not really the firmware… Just hoping you can find one…. Ricardo,,, my Kata i4 is not working, and it has a built in memory card. And when I opened again, its still not working..

You can use the flashing method that does not require a memory card and finally when you get the no command warning if you are trying to wipe try using another button at that screen such as pressing up, down etc or using buttons such as the soft keys to select.

Also is says this is not compatible with your device. Please search for a suitable replacement app. Hi i need firmware for a13 v2. Any help much appreciated. Sorry never had that issue, best I can suggest is find the correct file and attempt to flash again or look into debricking your device.

To all readers in need of a Firmware please read this updated article. X but still cant open part file. Its hard to find the exact match at times and some files can be corrupted, so either download again or find the file from another source or another matching one.

Fixing these things require patience. Please read this article and all other readers please do the same for your Firmware files. Can you please help me with it? Thank you in advance.

Hellow my friend, I opened my tablet but I couldnt find the board id, it isnt written, there is only the chips…my tablet looks like the black you have. In one chip i saw axp and that the proccessor is a13……the brand name is vivaco v-tab …pleasee help..

Dude i found my firmware but ntn is burning to the sd card.. It shows its loading but the disk is still empty.. After the firmware has burned.. I insert it in the tablet.. But i see a red box Nd a message saying an error message about script information not found.

Try burning the ROM again if the same thing happens then the issue is the ROM and you will need to get it from a new source. This will happen at times – check your SD card and try again, if that fails change SD cards and finally if that does not work change the ROM.

Thanks for the video anyway and more power!!! Hope you can read this. I have managed to open it but I cannot find processor number or ID. I am 75 years old so I am not very computer friendly but I can try.

Can you please help me to get my tablet working? I have the same problem for my tablet that sticking with android logo. But the link is not working at all… so can you please give me a link to download that?

Hello, iam prince my mid tablet stucks on boot screen. I need to find firmware for my Chinese tab which is stuck at android logo. Is there any way to convert this commands settings into English.

Or let me know away to re-install Android to this TAB. Thanks for the given stuff in your blog. O1 Please help me Ricardo. I had followed your steps in the video. Will not do anything to your SD card when finished you can format it back to normal or delete the files.

Andriod tab 4 im doing this on i need a fast comment please thank you and my device was rooted btw lol it just stays stuck on the SAMAUNG screen when trying to boot up and if i got it to boot up but everything was not respontive is there a fix to that aswell well anything i would click would be very slow to respond.

Yes its always smart to try to wipe the device first before attempting flashing. Flashing or wiping the device from recovery will not affect the things you have on the SD card, unless you are using it for flashing in which case I advise you back up the contents.

In cases where your tablet is slow and it boots up its advised to either wipe the Tablet or free up some space or clean junk files from your device. Any other questions you may have please feel free to ask.

However, after I take out the SD card and power it back up, it gets to the Irulu logo screen and says System is Starting… and just sits there. My serial number for the tabler is SN: Any help is greatly appreciated!

Do you have access to that firmware that is an exact full match? I downloaded it straight from the Irulu site using the SN on the back of the tablet and you saw the result.

It just stays on the Startup screen. Do i need to open the tablet and get a number for you? It should work fine, but double check the page on the manufacturers website to see what program they recommend that you use to confirm fully.

Thanks for your reply, the manafacturer recomends the programs which nly work when tablet is fully functional, should i try this and is their any phoenix card tool for ubuntu not for windows.

Thanks, Your site is awesome. Thanks you for your Kind words, its moments like this that creating this website to help readers is really worth it. As for should you try this You have nothing to loose and from the info you have given it should work.

Sorry my bad english. I have a big problem. This article here will answer all your questions sorry for the long delay. Hello Tutorial is Pretty Good…. What are you using to extract it?

I ran into a problem while attempting this method. Whenever I try to place my SD card into my tablet and power it on so it can format the tablet I receive an error that goes as follows: Try another firmware or recreate the the Bootable SD card, you can sometimes try downloading the file again as something might have gone wrong in the download process.

This process is keep repeating, its this normal? If this is abnormal, what should I do? That weird, try recreating the bootable SD card and try again, if the issue persists then try either downloading the firmware again or getting a better match.

Its either hit or miss with these things. Hi Ricardo, your blog is very helpful. It is a A33 GT90H-v1. I actually have another one exact the same. Do you have an idea how I can copy the form ware from the one that is working properly?

Hello My tablet was old one I kept it aside now after your post I will try to recover that brand: A10 and board Id: I cant Able to find anything in my tab for its firmware. So Please help me to for firmware of it.

Current card sprite failed Now Hold The Machin. Hey I need some help. Could you help me please. Thanks for your diligence Nick and your patience really paid off for you in finding your Firmware.

Please leave the details as to the exact Wintouch firmware that you used. So glad your tablet is even faster too. I have a Blaupunkt Endeavour NG with the Android screen problem but unable to locate appropate firmware — can you help.

It was just what I was looking for. That happens sometimes, it may be a slight mismatch or a drivers issue, its fixable do some research. I have problem with the phoenix card.

Please help me sir. Hi, Thank you for making this video. When i went through your blog i found a similar firmware you have suggested to someone else. So I downloaded it.

But my problem was with the Pheonix card 3. After doing all that as you said in the video i do not see any files on the SD card. Even using another version of the Pheonix Card 3.

I did this with a 2GB card and a 8 GB card as well with no luck. Yes you should the program can be buggy at times and it may take a few tries until the card is created properly. Thanks for this tutorial.

I opened it up and the motherboard is inetf-rev The processor is A Can you please help me find the firmware for it? If the firmware for it cannot be found, would it be acceptable to use a different firmware?

No serial or ID numbers. The box it came in just says Android 4. Any help would be very much appreciated. Read this and all other readers as well. Last time i download a non – market apps after a few minutes my tablet is stuck and then i reset and stuck on android logo..

Hi, I am trying to recover a cube talk 7x u51gt c4 — I can find the seperate img files for the firmware but I cant find a complete script I can use with phoenix card.

Can you help fine one, or is there a way to compile from the scatter files using some other programme? See this article here my friend. Can you please do me a big favour and look for the required firmware for me?

I spent all day searching and cannot find it. This is the info of my machine. Tegra Dual cortex A9, 1GHz. I found a different fix for my issue, and I would like to share it. Although my tablet came with a reset button push pin button, it didnt solve the problem.

But i tried doing the so-called rotation lock method, and it worked. I got my tablet unbricked though its back to its original firmware. But hey, my tablet is working again. That method only applies to the Acer Iconia and no other Tablet though my friend, I actually owned the very one and found it a weird procedure where I had to: I have never seen another Tablet that worked like that the procedure was overly complicated when the normal Android reset would have worked just fine.

Who knows why Asus does these things. I have already found the right firmware for the tablet. By the way, my tablet has a flashdrive port that is why I used a flashdrive, does it really need to use a microsd?

In all cases a SD Card is what I have used, also other users who have had success did the same thing. Good day sir, can i ask a few question, f a korean version tablet have a firmware also?

I just wanna try to fix it so that i didnt buy a new one. It also stuck on android logo. Thank you in advance sir. They all do the Firmware is basically the file used to flash the operating system on these devices, even if its Korean we call them all Chinese tablets by default.

I will need the board ID to actually help though. I have a problem. Read the Article on finding your Firmware I will not be taking any more Firmware requests my friend, the article explains everything.

Hi Ricardo, Thank you for your Tut….. I am after you expertise and advice please — Many Thanks Chris. Yes it sounds that to me and although I say Android logo, in some cases it gets stuck on the Tablets logo or brand which boils down to the same thing.

Also did you try performing a hard reset on the tablet before trying to flash it? Otherwise be sure to always verify that files are actually being written to the card, it would not hurt either to try another file as the one you are trying to flash may be incompatible and preventing boot up.

Did you do a hard reset? If so and thats the effect you are getting the next option is flashing the device, I have not seen an issue with Black screen after trying to boot, usually Black screen issues result in nothing but a black screen.

I still think flashing the device if resetting fail is the best bet provided its a software and not a hard ware issue. Hi Ricardo i have a question for you: Lan I would not mind looking for it for you, but I cant as I am super busy, however I did do a article that explains to everyone how to find there file and would love if every one simply read the article I did on finding their files here.

Ok sorry you did not find it, these files are really hard to find and doing so takes up a insane amount of time and effort to hunt down, only a closely matching file could possibly help your case now and that would involve you searching through those that are available and finding a close one if you want to actually sacrifice such time to bring back the device to life or as you say get a new one.

Kindly help me to find IMG file of my tablet. I have gone through the pain staking task of being very detailed and have linked to several support articles that shows you how to find everything I mention in the articles including any files and how to download them as shown here, so please read the article and apply what I have shown.

Follow the article or state your device so that I can give direct instructions, I need more details to be able to help. Thank you so much for this article. The issue was that my Neutab N10 Plus was not going past the android screen.

Therefore the Phoenix firmware updater was not recognizing that it was connected by USB. I used the method here of creating a bootable firmware and it worked perfectly. Thank you once again.

Glad you were patient and smart enough to improvise, patience and not quitting is a rare thing today most other users would have given up despite the wealth of info I have left to help them or point them in the right direction.

Thanks for this tutorial, my son will be over the moon. Glad to help Robie, always appreciated when a reader can follow instructions and improvise to make things work for them.

Sometimes Android phones get frozen or stuck on their loading screens. This is one of the more serious software problems that can occur on an Android smartphone and trying to fix it yourself, as you may already know, can sometimes be a challenge.

Make sure to follow ALL of the advice listed in this guide and you should be able to resolve this issue yourself and avoid sending your phone in for repair or having to buy a new one.

Start with a soft reset. A soft reset can sometimes resolve minor software issues and should be the first step to take when troubleshooting an Android smartphone.

Luckily Samsung phones are often designed to allow its owner the option of removing the battery and if your phone falls in this category then go ahead and…. Safe Mode is a feature on most Android devices that allows the phone to boot up without any third party apps or programs and on its original default settings.

This is a powerful tool when troubleshooting an Android device as it helps disable and rule out problematic applications. Best of all there is no unnecessary loss of data. The key combination that you will need to use will depend on which cell phone you own and possibly what version of Android it is running on.

It would be very difficult for me to list all of the methods commonly used for activating Safe Mode so if you are unsure what method to use for your specific smartphone then a simple search online would be your best bet at finding the proper technique for your particular smartphone.

Once you have located the proper method to use in order to boot your phone into Safe Mode, you should attempt to do so. If it works and your phone turns on completely then you should locate the latest piece of software, the latest app downloaded or updated, any new themes, etc that have been added to your cell phone and uninstall or remove them from your device.

Then restart the phone and see if it will boot up properly. If it does then you have located the cause and you can enjoy your working smartphone. If you cannot access Safe Mode on your particular Samsung device then continue with the suggestions below.

Whether you woke up and found your cell phone stuck on the Samsung logo after it had been charging all night or if this happened while or shortly after updating the software on your Samsung, or downloading or updating an application, or downloading a theme, etc.

All you will need to do to get your contact list again is to log into your Gmail account and your contacts are going to automatically sync with your phone. To check your Gmail account on a Samsung Android 4.

If you click on that Gmail account you can check to make sure everything is synced by looking for the days date. If sync contacts, sync Google, sync calendar, etc. Or tap on the desired selection if you want to manually sync that option.

You might need it later! You most likely have a Gmail and if you do then using your Gmail to backup your Android can be a life saver. It could be that something is corrupted such as a file or program, it could be a glitch in the software, or a virus viruses are not common but they do happen, most likely something picked up online or through a bad app or perhaps you just have really, really, really bad luck.

If you wait and the phone is still stuck on Samsung then you need to perform an alternate or hard reset on your Android phone to get it to work correctly again. I hope that I was able to help you get your issue taken care of one way or another.

Remember that pulling the battery out of your phone when your phone is powered on, will often fix a lot of minor issues with Android devices, at least temporarily, but a Factory Data Reset will usually be a more permanent Solution to common and non-common phone issues.

When performing a reset on an Android phone I highly suggest that you try it without downloading any applications for a couple days. Usually when smart phones, especially Android phones, act up it is because of a bad application that was downloaded or added to the device.

Try using the phone as a clean install for a couple days with nothing added to it except contacts etc, if your phone seems to be working correctly then start adding your applications again one at a time.

Download an app try it out for a few days, download another app try it, etc. I had this exact same question asked yesterday by one of my readers on a different article, which leads me to believe that I need to write a guide on how to resolve this issue on Sony smartphones as well.

I am not sure about what specific Sony phone you are having these problems with but you can read the advice that I gave to him here, as it applies to all make and models of Sony Android phones and it should get you on the right track in trying to fix this annoying issue on your Sony smartphone.

Well thank u i just read ur message now but i exactly got the same issue and when i upgrade its OS it starts working. The contacts list on my Samsung Galaxy S3 is frozen and to leave I have to turn the phone off and then restart it.

My galaxy has been stuck for almost a week now. I have tried hard reseting the phone multiple times buts it’s still not working. I changed the system font of my phone using iFont s.

It reboots but now stuck to logo! I can’t open it anymore Really need your help When i clicked apply, it rebooted my phone and it got stuck on my boot screen. I remember that it said something about the core.

I tried a factory reset through the recovery which worked perfectly but I know that your cell phone is rooted but out of curiosity have you had the opportunity to try to install a fresh copy of software to the device as mentioned towards the end of the article above?

Maybe a fresh install and starting from scratch again will allow you to pinpoint the exact cause or correct any software hiccups that might have occurred during the original installation.

Try a fresh installation first and if you still have issues then you might need to contact the software developer of that modded Play Store App or possibly even the app that you are trying to download.

When I tried to hard reset my phone it started working but when I downloaded some apps and restarted it my phone got stuck at the boot screen again. I had to do it 5 times to actually know what the problem was but now I know I tried to disable the play store in the phones settings I am sure that someone else can certainly benefit from what you discovered so thank you Ken for taking the time to not only come back to the site and post a follow-up but for also sharing what you ended up learning in order to fix your smartphone.

I have a galaxy s4 which worked fine at the beginning but, after few weeks the phone started to shut down and restart. I had factory reset the phone before which solved the problem but a new problem appeared shortly after.

After working with the phone and apps for 24 hours or less the phone suddenly shutdown and is now stuck at the Samsung boot logo. I have tried to remove the battery and have tried to restart the phone but after the phone vibrates it gets stuck on the boot logo.

Could someone help me to know what is the problem software or hardware and how to fix it? Make sure to follow ALL of the advice listed in the guide above and you will have a fighting chance at fixing your cell phone.

Work your way from the top and then go down from there. Good luck my friend. Replacing the malfunctioning software with a fresh copy should help resolve the problem.

My phone is stuck on the boot screen.. I already Powered it on and off again and again, but its still stuck and frozen on the boot animation screen.. I tried to factory data reset.. BUT my phone doesn’t have a Recovery mode installed!

What to do Friends.. This too can be a challenge depending on what cell phone you have. Less common cell phones may not have a lot of documentation online to help you through the re-flashing process.

I have said it before and ill say it again, this problem can be a real challenge to try and resolve and there is only so much that you can do to try to fix it. In your case I think that trying to replace the malfunctioning software is going to be your best bet at trying to fix your Android cell phone.

Hello, First thank you for all those good tips they have saved me a couple of times before having to spend money for a new phone. It should work fine, but double check the page on the manufacturers website to see what program they recommend that you use to confirm fully.

Thanks for your reply, the manafacturer recomends the programs which nly work when tablet is fully functional, should i try this and is their any phoenix card tool for ubuntu not for windows.

Thanks, Your site is awesome. Thanks you for your Kind words, its moments like this that creating this website to help readers is really worth it. As for should you try this You have nothing to loose and from the info you have given it should work.

Sorry my bad english. I have a big problem. This article here will answer all your questions sorry for the long delay. Hello Tutorial is Pretty Good…. What are you using to extract it?

I ran into a problem while attempting this method. Whenever I try to place my SD card into my tablet and power it on so it can format the tablet I receive an error that goes as follows: Try another firmware or recreate the the Bootable SD card, you can sometimes try downloading the file again as something might have gone wrong in the download process.

This process is keep repeating, its this normal? If this is abnormal, what should I do? That weird, try recreating the bootable SD card and try again, if the issue persists then try either downloading the firmware again or getting a better match.

Its either hit or miss with these things. Hi Ricardo, your blog is very helpful. It is a A33 GT90H-v1. I actually have another one exact the same. Do you have an idea how I can copy the form ware from the one that is working properly?

Hello My tablet was old one I kept it aside now after your post I will try to recover that brand: A10 and board Id: I cant Able to find anything in my tab for its firmware. So Please help me to for firmware of it.

Current card sprite failed Now Hold The Machin. Hey I need some help. Could you help me please. Thanks for your diligence Nick and your patience really paid off for you in finding your Firmware.

Please leave the details as to the exact Wintouch firmware that you used. So glad your tablet is even faster too. I have a Blaupunkt Endeavour NG with the Android screen problem but unable to locate appropate firmware — can you help.

It was just what I was looking for. That happens sometimes, it may be a slight mismatch or a drivers issue, its fixable do some research. I have problem with the phoenix card.

Please help me sir. Hi, Thank you for making this video. When i went through your blog i found a similar firmware you have suggested to someone else. So I downloaded it.

But my problem was with the Pheonix card 3. After doing all that as you said in the video i do not see any files on the SD card. Even using another version of the Pheonix Card 3. I did this with a 2GB card and a 8 GB card as well with no luck.

Yes you should the program can be buggy at times and it may take a few tries until the card is created properly. Thanks for this tutorial. I opened it up and the motherboard is inetf-rev The processor is A Can you please help me find the firmware for it?

If the firmware for it cannot be found, would it be acceptable to use a different firmware? No serial or ID numbers. The box it came in just says Android 4.

Any help would be very much appreciated. Read this and all other readers as well. Last time i download a non – market apps after a few minutes my tablet is stuck and then i reset and stuck on android logo..

Hi, I am trying to recover a cube talk 7x u51gt c4 — I can find the seperate img files for the firmware but I cant find a complete script I can use with phoenix card. Can you help fine one, or is there a way to compile from the scatter files using some other programme?

See this article here my friend. Can you please do me a big favour and look for the required firmware for me? I spent all day searching and cannot find it. This is the info of my machine.

Tegra Dual cortex A9, 1GHz. I found a different fix for my issue, and I would like to share it. Although my tablet came with a reset button push pin button, it didnt solve the problem.

But i tried doing the so-called rotation lock method, and it worked. I got my tablet unbricked though its back to its original firmware. But hey, my tablet is working again.

That method only applies to the Acer Iconia and no other Tablet though my friend, I actually owned the very one and found it a weird procedure where I had to: I have never seen another Tablet that worked like that the procedure was overly complicated when the normal Android reset would have worked just fine.

Who knows why Asus does these things. I have already found the right firmware for the tablet. By the way, my tablet has a flashdrive port that is why I used a flashdrive, does it really need to use a microsd?

In all cases a SD Card is what I have used, also other users who have had success did the same thing. Good day sir, can i ask a few question, f a korean version tablet have a firmware also?

I just wanna try to fix it so that i didnt buy a new one. It also stuck on android logo. Thank you in advance sir. They all do the Firmware is basically the file used to flash the operating system on these devices, even if its Korean we call them all Chinese tablets by default.

I will need the board ID to actually help though. I have a problem. Read the Article on finding your Firmware I will not be taking any more Firmware requests my friend, the article explains everything.

Hi Ricardo, Thank you for your Tut….. I am after you expertise and advice please — Many Thanks Chris. Yes it sounds that to me and although I say Android logo, in some cases it gets stuck on the Tablets logo or brand which boils down to the same thing.

Also did you try performing a hard reset on the tablet before trying to flash it? Otherwise be sure to always verify that files are actually being written to the card, it would not hurt either to try another file as the one you are trying to flash may be incompatible and preventing boot up.

Did you do a hard reset? If so and thats the effect you are getting the next option is flashing the device, I have not seen an issue with Black screen after trying to boot, usually Black screen issues result in nothing but a black screen.

I still think flashing the device if resetting fail is the best bet provided its a software and not a hard ware issue. Hi Ricardo i have a question for you: Lan I would not mind looking for it for you, but I cant as I am super busy, however I did do a article that explains to everyone how to find there file and would love if every one simply read the article I did on finding their files here.

Ok sorry you did not find it, these files are really hard to find and doing so takes up a insane amount of time and effort to hunt down, only a closely matching file could possibly help your case now and that would involve you searching through those that are available and finding a close one if you want to actually sacrifice such time to bring back the device to life or as you say get a new one.

Kindly help me to find IMG file of my tablet. I have gone through the pain staking task of being very detailed and have linked to several support articles that shows you how to find everything I mention in the articles including any files and how to download them as shown here, so please read the article and apply what I have shown.

Follow the article or state your device so that I can give direct instructions, I need more details to be able to help. Thank you so much for this article. The issue was that my Neutab N10 Plus was not going past the android screen.

Therefore the Phoenix firmware updater was not recognizing that it was connected by USB. I used the method here of creating a bootable firmware and it worked perfectly. Thank you once again. Glad you were patient and smart enough to improvise, patience and not quitting is a rare thing today most other users would have given up despite the wealth of info I have left to help them or point them in the right direction.

Thanks for this tutorial, my son will be over the moon. Glad to help Robie, always appreciated when a reader can follow instructions and improvise to make things work for them. I have an article on the No command issue here read it.

A good job and well appreciated! Please I need the latest firmware for Zoostorm Playtab. The one I found on their website is not working with the pheonix software! Did you see what software the website recommended to use the file they gave?

But i like your method, its much better than the others on YouTube. My Phone Won’t Charge 3. Android Stuck on Boot Screen 4. Play Store Not Working 5. Android System UI Stopped 6.

Problem Parsing the Package 7. Android Encryption Unsuccessful 8. Samsung Keyboard Stopped 9. App Won’t Open Unfortunately App Has Stopped Uninstall Google Play Service Android Phone Slow Android Safe Mode Android Apps Keeps Crashing Phone Keep Turning Off Flash Dead Android Phone Samsung Odin Fail HTC White Screen Android Black Screen of Death Fix Soft Bricked Android Boot Loop Android Android App Not Installed Android Blue Screen of Death Tablet White Screen Samsung S5 Won’t Turn On S6 Won’t Turn On Galaxy S7 Won’t Turn On Samsung Tablet Problems Android Repair Software Blueborne Vulnerability Scanner

Degrees is tablet on android android my stuck screen the 380 for concealed

It will not change any text entered by users. Hi, I am trying to recover a cube talk 7x u51gt c4 — I can find the seperate img files for the firmware but I cant find a complete script I can use with phoenix card. Recover Data on your Stuck Android The solution for this problem will result in data loss. Sorry my bad english. ATM atm a v7 v1.

Also for the Touch screen not working you were close in finding a matching Firmware but the drivers are all wrong that built into the firmware so you need to continue the Firmware search here that I have provided a bunch of Firmware files. How can I bypass Samsung lock screen? Battery Pull If possible try removing the battery from your cell phone for seconds then reinsert the battery put your phone back together and then see if it will power on properly. Android Error 3.

You can choose to leave your phones bootloader unlocked and continue to use the phone as a super user. Finding a jig for your specific cell phone might be a challenge though depending on which device you own. I had followed your steps in the video. Providing as much detail as possible in your explanation often helps take a lot of the guess work out of the equation as well and the more information I have to work with the better answer I can usually provide.

See…

198 199 200 201 202

 

Is on the screen my android android stuck tablet 4shared para portugues

I cant Able to find anything in my tab for its firmware. Click on Next to move on. I am 75 years old so I am not very computer friendly but I can try. Accessing the system recovery tool is going to vary from device to device so if you are not sure how to access this tool on your specific smartphone then much like accessing Safe Mode a quick Google search may be required. See…

(c) 2017 http://sawron. com. Theme: / and Http://sawron. com/.

Related posts

Leave a Comment